Brake Actuator: Disposal
- DISPOSE OF BRAKE ACTUATOR ASSEMBLY
- Using a drill, slowly make a hole at the circumference made by the center points of A and discharge the gas.
CAUTION: Be sure to wear protective glasses to protect from fragments that may become airborne due to high pressure.
HINT:
- The hole may be drilled up to approximately 5 to 10 mm (0.20 to 0.39 in.) away from the point indicated by A without problem.
- The gas is nitrogen, which is colorless, odorless, and harmless.
- Using a drill, slowly make a hole at the circumference made by the center points of A and discharge the gas.