Camshaft Timing Oil Control Valve Assembly: Installation

INSTALL CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Bank 1)
1. Apply a coat of engine oil to an O-ring of the sensor.
2. Install the camshaft timing oil control valve with the bolt.
  Torque: 8.0 N*m (82 kgf*cm, 71 in.*lbf)
3. Connect the camshaft timing oil control valve connector.
  
  Fig 1: Identifying Camshaft Timing Oil Control Valve Connector (For Bank 1)
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Bank 2)
1. Apply a coat of engine oil to an O-ring of the sensor.
2. Install the camshaft timing oil control valve with the bolt.
  Torque: 8.0 N*m (82 kgf*cm, 71 in.*lbf)
  
  Connect the camshaft timing oil control valve connector.
  
  Fig 2: Identifying Camshaft Timing Oil Control Valve Connector (For Bank 2)
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE AIR CLEANER CASE W/ RESONATOR (See REMOVAL )
REMOVE AIR CLEANER CAP W/ INLET (See REMOVAL )
REMOVE COOL AIR INTAKE DUCT SEAL (See REMOVAL )
REMOVE ENGINE ROOM COVER SIDE (See REMOVAL )
REMOVE ENGINE ROOM SIDE LH COVER (See REMOVAL )