Torque Specifications
TORQUE SPECIFICATIONS - P310 HYBRID VEHICLE CONTROL
| Part Tightened | N*m | kgf*cm | ft.*lbf |
|---|---|---|---|
| W/ converter inverter x Inverter bracket | 21 | 214 | 15 |
| Inverter bracket No.4 x W/ converter inverter | 21 | 214 | 15 |
| No.3 wire frame x W/ converter inverter | 10 | 102 | 7 |
| High voltage cable of front motor x W/ converter inverter | 10 | 102 | 7 |
| Engine wire No.4 x W/ converter inverter | 5.4 | 55 | 48in.*lbf |
| Inverter cover x W/ converter inverter | 10 | 102 | 7 |
| Interlock bracket x W/ converter inverter | 10 | 102 | 7 |
| Power steering ECU bracket x W/ converter inverter | 8.0 | 82 | 71in.*lbf |
| Inverter reserve tank sub-assembly x W/ converter inverter | 10 | 102 | 7 |
| Engine room wire No.2 x Fusible link block assembly | 8.5 | 87 | 75in.*lbf |
| Hybrid vehicle control ECU x Body | 5.5 | 56 | 49in.*lbf |
| Water w/ motor and bracket pump assembly x Body | 7.0 | 71 | 62in.*lbf |
| Frame side rail plate sub-assembly LH x Body | |||
| Bolt A | 85 | 867 | 63 |
| Bolt B | 32 | 326 | 24 |
| Nut | 32 | 326 | 24 |
| Radiator assembly x Condenser assembly | 5.0 | 51 | 44in.*lbf |
| Hood lock support sub-assembly x Body | 7.0 | 71 | 62in.*lbf |
| Accelerator pedal rod assembly x Floor | 4.9 | 50 | 43in.*lbf |
| Circuit breaker sensor No.1 x W/ converter inverter | 8.0 | 82 | 70in.*lbf |
| Rear circuit breaker sensor x Floor | 8.0 | 82 | 70in.*lbf |
| No.3 wire frame x Body | 8.5 | 87 | 75in.*lbf |
| No.3 wire frame x Hybrid vehicle relay | 9.0 | 92 | 80in.*lbf |
| No.3 wire frame x Battery cover assembly | 8.0 | 82 | 72in.*lbf |
| No.3 wire frame x Power steering converter assembly | 5.5 | 56 | 49in.*lbf |