Inspection Procedure

1. Clear the DTC (See DTC CHECK/CLEAR  ).
2. Turn the engine switch on (IG).
3. Check if the same DTC is recorded (See DTC CHECK/CLEAR  ).

   Result 

   RESULT REFERENCE
   
   

   Condition	Proceed to
   DTC (ABS control system DTC) is not output	A
   DTC (ABS control system DTC) is output	B

B: REPAIR CIRCUIT INDICATED BY OUTPUT DTC (See  DIAGNOSTIC TROUBLE CODE CHART   ) 

A: Go to Next Step 

1. Turn the engine switch off.
2. Clear the DTC (See DTC CHECK/CLEAR  ).
3. Turn the engine switch on (IG).
4. Check if the same DTC is recorded (See DTC CHECK/CLEAR  ).

   Result 

   RESULT REFERENCE
   
   

   Condition	Proceed to
   DTC (43) is not output	A
   DTC (43) is output	B

B: REPLACE BRAKE ACTUATOR ASSEMBLY 

A: CHECK FOR INTERMITTENT PROBLEMS (SYMPTOM SIMULATION)