LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2008 >> ES 350 >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> Engine Control System - Diagnostic Codes (3 Of 4) >> DTC P0604 Internal Control Module Random Access Memory (RAM) Error >> Inspection Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Inspection Procedure

  1. CHECK OTHER DTC OUTPUT (IN ADDITION TO DTC P0604) 
    1. Connect Techstream to the DLC3.
    2. Turn the engine switch on (IG).
    3. Turn the tester on.
    4. Clear the DTC.
    5. Turn the engine switch off.
    6. Disconnect the battery negative terminal and wait for 1 minute.
    7. Connect the battery negative terminal.
    8. Turn the engine switch on (IG).
    9. Enter the following menus: Powertrain / Engine / Trouble Code.
    10. Read the DTCs.

      Result 

      RESULT CHART

      Display (DTC output) Proceed to
      P0604 A
      No output DTC B

    B: CHECK FOR INTERMITTENT PROBLEMS 

    A: REPLACE ECM (See  REMOVAL  )