Active Control Engine Mount Ecu: Installation

INSTALL ACTIVE CONTROL ENGINE MOUNT ECU
1. Install the active control engine mount ECU with the nut.
  Torque: 13 N*m (133 kgf*cm, 10 ft.*lbf)
  
  Fig 1: Locating Active Control Engine Mount ECU Nut
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Connect the connector.
INSTALL LOWER INSTRUMENT PANEL RH (See INSTALLATION )
INSTALL FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY (See ON-VEHICLE INSPECTION )
INSTALL FRONT DOOR OPENING TRIM COVER RH (See INSTALLATION )

Fig 2: Identifying Active Control Engine Mount ECU Connector
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL FRONT DOOR SCUFF PLATE RH (See INSTALLATION )
INSTALL INSTRUMENT PANEL FINISH PANEL END RH (See INSTALLATION )
INSTALL SIDE INSTRUMENT PANEL RH (See INSTALLATION )
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See INITIALIZATION ).
INSPECT FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY (See ON-VEHICLE INSPECTION )
INSPECT SRS WARNING LIGHT (See ON-VEHICLE INSPECTION )