On-Vehicle Inspection
- INSPECT DEFOGGER RELAY (Marking: RR DEF)
- Measure the resistance according to the value(s) in the table below.
Standard resistance
TESTER CONNECTION SPECIFIED CONDITION CHARTTester Condition Specified Condition 3 - 4 Below 1 Ω
(when battery voltage is not applied between terminals)3 - 5 10 kΩ or higher
(when battery voltage is not applied between terminals)3 - 5 Below 1 Ω
(when battery voltage is applied to terminals 1 and 2)If the result is not as specified, replace the relay.
- Measure the resistance according to the value(s) in the table below.