LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2008 >> ES 350 >> Repair and Diagnosis >> Brakes >> Traction Control >> Brake Control >> Skid Control Buzzer >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Skid Control Buzzer: Removal

  1. PRECAUTION 
  2. REMOVE SHIFT LEVER KNOB  (See REMOVAL ).
  3. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY WITH FRONT ASH RECEPTACLE  (See REMOVAL ).
  4. REMOVE INSTRUMENT PANEL FINISH END PANEL LH  (See REMOVAL ).
  5. REMOVE INSTRUMENT PANEL FINISH END PANEL RH  (See REMOVAL ).
  6. REMOVE CONSOLE POCKET  (See REMOVAL ).
  7. REMOVE CONSOLE BOX CARPET  (See REMOVAL ).
  8. REMOVE CONSOLE REAR END PANEL SUB-ASSEMBLY  (See REMOVAL ).
  9. REMOVE REAR CONSOLE BOX ASSEMBLY  (See REMOVAL ).
  10. REMOVE NO. 2 INSTRUMENT PANEL REGISTER ASSEMBLY  (See REMOVAL ).
  11. REMOVE INTEGRATION CONTROL PANEL WITH RADIO RECEIVER ASSEMBLY (w/o Navigation System)  (See RADIO RECEIVER ).
  12. REMOVE MULTI-DISPLAY WITH RADIO RECEIVER ASSEMBLY (w/ Navigation System)  (See RADIO RECEIVER ).
  13. REMOVE SKID CONTROL BUZZER 
    1. Disconnect the skid control buzzer connector.
    2. Remove the clip and skid control buzzer assembly.
      Fig 1: Locating Skid Control Buzzer Connector
      G05250511Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals