On-Vehicle Inspection
- INSPECT INTAKE AIR CONTROL VALVE ASSEMBLY
- Inspection procedure when using the Techstream:
- Warm up the engine.
- Stop the engine.
- Connect the Techstream to the DLC3.
- Turn the engine switch on (IG).
- Turn the tester on.
- Select the following menu items: DIAGNOSIS / ENHANCED OBD II / ACTIVE TEST / INTAKE CTL VSV1. Press the right or left button.
- Make sure that a clicking sound is heard from the intake air control valve when current flows. If the result is not as specified, replace the intake air surge tank.