Typical Malfunction Thresholds
Functional check:
TYPICAL MALFUNCTION THRESHOLDS
| Either the following condition 1 or 2 is met | - |
| 1 Frequency that following conditions (a) and (b) are met. | 5 time or more |
| (a) Engine RPM - target engine RPM | Below -100 rpm, or 150 rpm or more |
| (b) Vehicle condition | Stop after vehicle was driven by 6 25 mph (10 km/h) or more |
| 2 Frequency that following conditions (a) and (b) are met: | Once |
| (a) Engine RPM - target engine RPM | Below -100 rpm, or 150 rpm or more |
| (b) ISC flow rate learning value | 1.3 L/sec or less or 9 03 L/sec or more |