Active Control Engine Mount Ecu: Removal

PRECAUTION
CAUTION: Be sure to read "PRECAUTION" thoroughly before servicing (See PRECAUTION ).
DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait for 90 seconds after disconnecting the cable to prevent airbag deployment (See AIRBAG SYSTEM ).

NOTE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See INITIALIZATION ).
REMOVE SIDE INSTRUMENT PANEL RH (See REMOVAL )
REMOVE INSTRUMENT PANEL FINISH PANEL END RH (See REMOVAL )
REMOVE FRONT DOOR SCUFF PLATE RH (See REMOVAL )
REMOVE FRONT DOOR OPENING TRIM COVER RH (See REMOVAL )
REMOVE FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY (See REMOVAL )
REMOVE LOWER INSTRUMENT PANEL RH (See REMOVAL )
REMOVE ACTIVE CONTROL ENGINE MOUNT ECU
1. Disconnect the connector.
  
  Fig 1: Identifying Active Control Engine Mount ECU Connector
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Remove the nut and active control engine mount ECU.
  
  Fig 2: Locating Active Control Engine Mount ECU Nut
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002