Camshaft Timing Oil Control Valve Assembly: Installation

INSTALL CAMSHAFT TIMING OIL CONTROL VALVE (for Bank 2 Exhaust Side)
1. Apply a light coat of engine oil to a new O-ring and install it to the camshaft timing oil control valve.
  
  Fig 1: Locating Camshaft Timing Oil Control Valve O-Ring
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Install the camshaft timing oil control valve with the bolt.
  Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf)
  
  NOTE: Make sure that the O-ring is not cracked or jammed when installing the oil control valve.
3. Connect the camshaft timing oil control valve connector.
  
  Fig 2: Locating Camshaft Timing Oil Control Valve Bolt
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL CAMSHAFT TIMING OIL CONTROL VALVE (for Bank 2 Intake Side)
1. Apply a light coat of engine oil to a new O-ring and install it to the camshaft timing oil control valve.
  
  Fig 3: Locating Camshaft Timing Oil Control Valve O-Ring
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Install the camshaft timing oil control valve with the bolt.
  Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf)
  
  NOTE: Make sure that the O-ring is not cracked or jammed when installing the oil control valve.
3. Connect the camshaft timing oil control valve connector.
  
  Fig 4: Locating Camshaft Timing Oil Control Valve Bolt
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL CAMSHAFT TIMING OIL CONTROL VALVE (for Bank 1 Exhaust Side)
1. Apply a light coat of engine oil to a new O-ring and install it to the camshaft timing oil control valve.
  
  Fig 5: Locating Camshaft Timing Oil Control Valve O-Ring
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Install the camshaft timing oil control valve with the bolt.
  Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf)
  
  NOTE: Make sure that the O-ring is not cracked or jammed when installing the oil control valve.
3. Connect the camshaft timing oil control valve connector.
  
  Fig 6: Locating Camshaft Timing Oil Control Valve With Bolt
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL CAMSHAFT TIMING OIL CONTROL VALVE (for Bank 1 Intake Side)
1. Apply a light coat of engine oil to a new O-ring and install it to the camshaft timing oil control valve.
  
  Fig 7: Locating Camshaft Timing Oil Control Valve O-Ring
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Install the camshaft timing oil control valve with the bolt.
  Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf)
  
  NOTE: Make sure that the O-ring is not cracked or jammed when installing the oil control valve.
3. Connect the camshaft timing oil control valve connector.
  
  Fig 8: Locating Camshaft Timing Oil Control Valve Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL INTAKE AIR SURGE TANK (See INSTALLATION )
INSTALL NO. 1 AIR CLEANER INLET (See INSTALLATION )
INSTALL AIR CLEANER CASE SUB-ASSEMBLY (See INSTALLATION )
INSTALL AIR CLEANER CAP SUB-ASSEMBLY (See INSTALLATION )
INSTALL AIR CLEANER INLET ASSEMBLY (See INSTALLATION )
INSTALL FRONT SUSPENSION UPPER CENTER BRACE (See INSTALLATION )
ADD ENGINE COOLANT (See Drain or Add coolant under ON-VEHICLE INSPECTION )
CHECK FOR ENGINE COOLANT LEAKS (See ON-VEHICLE INSPECTION )
INSTALL V-BANK COVER SUB-ASSEMBLY (See INSTALLATION )
INSTALL ENGINE ROOM SIDE COVER LH (See INSTALLATION )
INSTALL ENGINE ROOM SIDE COVER RH (See INSTALLATION )
INSTALL COOL AIR INTAKE DUCT SEAL (See INSTALLATION )
INSTALL ENGINE UNDER COVER RH
INSTALL ENGINE UNDER COVER LH