LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2008 >> ES 350 >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - System & Component Testing, Removal, Inspection & Installation >> Camshaft Timing Oil Control Valve Assembly >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Camshaft Timing Oil Control Valve Assembly: Removal

  1. REMOVE ENGINE UNDER COVER LH 
  2. REMOVE ENGINE UNDER COVER RH 
  3. REMOVE COOL AIR INTAKE DUCT SEAL  (See REMOVAL )
  4. REMOVE ENGINE ROOM SIDE COVER LH  (See REMOVAL )
  5. REMOVE ENGINE ROOM SIDE COVER RH  (See REMOVAL )
  6. DRAIN ENGINE COOLANT  (See Drain or Add coolant under ON-VEHICLE INSPECTION )
  7. REMOVE FRONT SUSPENSION UPPER CENTER BRACE  (See REMOVAL )
  8. REMOVE V-BANK COVER SUB-ASSEMBLY  (See REMOVAL )
  9. REMOVE AIR CLEANER INLET ASSEMBLY  (See REMOVAL )
  10. REMOVE AIR CLEANER CAP SUB-ASSEMBLY (See  REMOVAL   ) 
  11. REMOVE AIR CLEANER CASE SUB-ASSEMBLY  (See REMOVAL )
  12. REMOVE NO. 1 AIR CLEANER INLET  (See REMOVAL )
  13. REMOVE INTAKE AIR SURGE TANK  (See REMOVAL )
  14. REMOVE CAMSHAFT TIMING OIL CONTROL VALVE (for Bank 1 Exhaust Side) 
    1. Disconnect the camshaft timing oil control valve connector.
    2. Remove the bolt and camshaft timing oil control valve.
    3. Remove the O-ring from the camshaft timing oil control valve.
      Fig 1: Locating Camshaft Timing Oil Control Valve Bolt
      G04973849Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  15. REMOVE CAMSHAFT TIMING OIL CONTROL VALVE (for Bank 1 Intake Side) 
    1. Disconnect the camshaft timing oil control valve connector.
    2. Remove the bolt and camshaft timing oil control valve.
    3. Remove the O-ring from the camshaft timing oil control valve.
      Fig 2: Locating Camshaft Timing Oil Control Valve Bolts
      G04973848Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  16. REMOVE CAMSHAFT TIMING OIL CONTROL VALVE (for Bank 2 Exhaust Side) 
    1. Disconnect the camshaft timing oil control valve connector.
    2. Remove the bolt and camshaft timing oil control valve.
    3. Remove the O-ring from the camshaft timing oil control valve.
      Fig 3: Locating Camshaft Timing Oil Control Valve Bolt
      G04973850Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  17. REMOVE CAMSHAFT TIMING OIL CONTROL VALVE (for Bank 2 Intake Side) 
    1. Disconnect the camshaft timing oil control valve connector.
    2. Remove the bolt and camshaft timing oil control valve.
    3. Remove the O-ring from the camshaft timing oil control valve.
      Fig 4: Locating Camshaft Timing Oil Control Valve Bolt
      G04973849Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals