LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2008 >> ES 350 >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - System & Component Testing, Removal, Inspection & Installation >> Crankshaft Position Sensor >> Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Crankshaft Position Sensor: Inspection

  1. INSPECT CRANKSHAFT POSITION SENSOR 
    1. Using an ohmmeter, measure the resistance between the terminals.

      Standard Resistance 

      TERMINALS RESISTANCE CHART

      Condition Specified Condition
      Cold 1,630 to 2,740 Ω
      Hot 2,065 to 3,225 Ω
      Fig 1: Identifying Crankshaft Position Sensor Connector Terminals
      G05247949Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      NOTE: The terms "cold" and "hot" refer to the temperature of the coils. "Cold" means approximately -10 to 50°C (14 to 122°F). "Hot" means approximately 50 to 100C (122 to 212°F).

      If the resistance is not as specified, replace the sensor.

scientia non olet · About LEMON Manuals