Crankshaft Position Sensor: Installation

1. Apply a light coat of engine oil to the O-ring of the crankshaft position sensor.
2. Install the crankshaft position sensor with the bolt.

   Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf) 

3. Connect the crankshaft position sensor connector.
   Fig 1: Locating Crankshaft Position Sensor With Bolt

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

HINT:

(See INSTALLATION )

HINT:

(See INSTALLATION )