Skid Control Buzzer: Inspection
WARNING: This page is about a different car, the 2007 Lexus ES 350. However, it is still accessible from the selected car via links, so may be relevant.
- INSPECT SKID CONTROL BUZZER
- Apply battery negative voltage to terminal 1, and battery positive voltage to terminal 2 of the skid control buzzer, and then check that the buzzer sounds.
OK:
The skid control buzzer sounds.
If the skid control buzzer does not sound, replace the skid control buzzer.
- Apply battery negative voltage to terminal 1, and battery positive voltage to terminal 2 of the skid control buzzer, and then check that the buzzer sounds.