Torque Specifications
U660E A/T COMPONENTS - TORQUE SPECIFICATIONS
| Part Tightened | N*m | kgf*cm | ft.*lbf | |
|---|---|---|---|---|
| Park/neutral position switch | 5.4 | 55 | 48 in.*lbf | |
| Control shaft lever x Control shaft | 13 | 130 | 9 | |
| Transmission control cable x Control shaft lever | 13 | 130 | 9 | |
| Transaxle housing x Engine block | Bolt A | 64 | 653 | 47 |
| Bolt B | 64 | 653 | 47 | |
| Bolt C | 46 | 469 | 34 | |
| Bolt D | 43 | 439 | 32 | |
| Torque converter clutch x Drive plate | 41 | 418 | 30 | |
| Engine mounting front bracket x Transaxle case | 64 | 653 | 47 | |
| Refill plug x Transaxle case | 49 | 500 | 36 | |
| Over flow plug x Transaxle case | 40 | 408 | 30 | |
| Control cable bracket No 1 x Transaxle case | 12 | 122 | 9 | |
| Oil cooler tube union (inlet oil cooler union) x Transaxle case | 27 | 275 | 20 | |
| Oil cooler tube union (outlet oil cooler union) x Transaxle case | 27 | 275 | 20 | |
| Wire harness x Transaxle case | 12 | 122 | 9 | |
| Wire harness clamp bracket x Transaxle case | 8.4 | 86 | 74 in *lbf | |
| Transmission revolution sensor x Valve body | 11 | 112 | 8 | |
| No 1 transmission oil filler tube x Oil pan | 1 7 | 17 | 15 in.*lbf | |
| Speedometer driven hole cover x Transaxle case | 5.5 | 56 | 49 in.*lbf | |
| Transmission wire (ATF temperature sensor) x Valve body | 11 | 112 | 8 | |
| Oil pan x Transaxle case | 75 | 76 | 66 in.*lbf | |
| Transmission wire x Valve body | 11 | 112 | 8 | |
| Valve body x Transaxle case | 11 | 112 | 8 | |
| Oil strainer x Valve body | 11 | 112 | 8 | |
| Breather bracket x Camshaft housing sub-assembly LH | 55 | 56 | 49 in.*lbf | |
| Air cleaner bracket x Body | 78 | 80 | 69 in.*lbf | |
| No. 2 shift cable grommet retainer x Body | 50 | 51 | 44 in.*lbf | |
| Flywheel housing under cover x Transaxle housing | 78 | 80 | 69 in.*lbf | |
| TCM x Transaxle case | 11 | 112 | 8 | |
| Shift lock control unit x Body | 12 | 122 | 9 | |
| Differential gear lube apply tube x Transaxle housing | 23 | 234 | 17 | |
| Lock nut x Transaxle case | 120 | 1,223 | 88 | |
| Transaxle case No. 1 plug x Transaxle rear cover | 74 | 75 | 65 in.*lbf | |
| Transaxle case No. 1 plug x Transaxle housing | 7.4 | 75 | 65 in *lbf | |
| Transaxle case No. 1 plug x Transaxle case | 29 | 296 | 20 | |
| Transaxle rear cover x Transaxle case | Bolt A | 23 | 234 | 17 |
| Bolt B | 17 | 173 | 12 | |
| Transaxle rear cover plate x Transaxle case | 75 | 76 | 66 in.*lbf | |
| Oil pump assembly x Transaxle case | 23 | 234 | 17 | |
| Transaxle housing x Transaxle case | Bolt A | 31 | 316 | 23 |
| Bolt B | 23 | 234 | 17 | |
| Pawl shaft clamp x Transaxle case | 23 | 234 | 17 | |
| Pawl stopper plate x Transaxle case | 23 | 234 | 17 | |
| Manual detent spring x Transaxle case | 23 | 234 | 17 | |
| Oil pump body x Stator shaft assembly | 9.3 | 95 | 82 in *lbf | |
| Shift solenoid valve SL3 x Transmission valve body assembly | 11 | 110 | 8 | |
| Shift solenoid valve SL4 x Transmission valve body assembly | 11 | 110 | 8 | |
| Front differential case x Front differential ring gear | 120 | 1,223 | 88 | |