Shift Lever: Inspection
- INSPECT TRANSMISSION CONTROL SWITCH
- Measure the resistance between each terminal of the shift lever assembly when the shift lever is moved to each position.
Standard Resistance
STANDARD RESISTANCE SPECIFICATIONShift Position Tester Connection Specified Condition S, "+" and "-" 3 - 7 Below 1 Ω Except S, "+" and "-" 3 - 7 10 kΩ or higher Press continuously "+" (Upshift) 2 - 5 Below 1 Ω S 2 - 5 10 kΩ or higher Press continuously "-" (Downshift) 1 - 5 Below 1 Ω S 1 - 5 10 kΩ or higher Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
If the resistance value is not as specified, replace the shift lock control ECU.
- Measure the resistance between each terminal of the shift lever assembly when the shift lever is moved to each position.