Inspection Procedure

1. Check that the wireless transmitter and driver's door key cylinder (key linked switch) can control all the doors to lock and unlock normally.

   Result 

   RESULT CHART
   
   

   Result	Proceed to
   Transmitter and driver's door key cylinder operate normally	A
   Transmitter does not operate normally	B
   Driver's door key cylinder does not operate normally	C

B : GO TO WIRELESS DOOR LOCK CONTROL SYSTEM  (See HOW TO PROCEED WITH TROUBLESHOOTING )

C : GO TO POWER DOOR LOCK CONTROL SYSTEM  (See HOW TO PROCEED WITH TROUBLESHOOTING )

A : Go to Next Step 

1. Check that the manual UP/DOWN function using the master switch and regulator switch can operate all the power windows.

   OK: 

   Manual UP/DOWN functions operate normally. 

NG : OTHER PROBLEM  (GO TO PROBLEM SYMPTOMS TABLE )

OK : Go to Next Step 

1. Check that the remote UP/DOWN function using the master switch can operate the power windows.

   OK: 

   Remote UP/DOWN functions operate normally. 

NG : OTHER PROBLEM (GO TO PROBLEM SYMPTOMS TABLE )

OK : REPLACE BODY ECU (COWL SIDE JUNCTION BLOCK RH)