Service Data
SERVICE DATA - 1UR-FSE COOLING
| Cooling fan motor | Standard current 2 to 12 A (when the A/C switch is turned ON (MAX COOL and the magnetic clutch is operating) |
| Standard current 14.7 to 18.7A at 20°C (68°F) (when the battery is connected to the fan motor connector) |
|
| Standard current 2 to 18.1 A (when the engine coolant temperature sensor connector is disconnected) |
|
| No. 2 cooling fan motor | Standard current 2 to 12 A (when the A/C switch is turned ON (MAX COOL and the magnetic clutch is operating) |
| Standard current 14.7 to 18.7A at 20°C (68°F) (when the battery is connected to the fan motor connector) |
|
| Standard current 2 to 18.1 A (when the engine coolant temperature sensor connector is disconnected) |
|
| Water inlet sub-assembly with thermostat | Valve opening temperature 80 to 84°C (176 to 183°F) |
| Valve lift 10.0 mm (0.394 in.) or more at 95°C (203°F) |
|
| Cooling fan relay | 3-5:10 MΩ or higher |
| 3 - 5: Below 1 Ω (when battery voltage is applied to terminals 1 and 2) |
|
| Cooling fan ECU | Standard voltage 11 to 14 V (when turn the engine switch on (IG)) |