LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2008 >> GS 350 RWD >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Seat Belt >> Child Restraint Seat Tether Anchor >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Child Restraint Seat Tether Anchor: Installation

  1. INSTALL CHILD RESTRAINT SEAT TETHER ANCHOR BRACKET 
    1. Align the claw with the positioning hole and install the anchor bracket with the bolt.

      Torque: 21 N*m (214 kgf*cm, 15 ft.*lbf) 

  2. INSTALL PACKAGE TRAY TRIM PANEL ASSEMBLY (w/ Sunshade)  (See INSTALLATION )
  3. INSTALL PACKAGE TRAY TRIM PANEL ASSEMBLY  (See INSTALLATION  )
    Fig 1: Identifying Anchor Bracket With Bolt
    G05013665Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. INSTALL CHILD RESTRAINT SEAT TETHER ANCHOR COVER 
    Fig 2: Identifying Anchor Cover Clips And Claws
    G05298539Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Install the tether anchor cover to the package tray trim panel as shown in the illustration.
  5. INSTALL ROOF SIDE GARNISH INNER  (See INSTALLATION )
  6. INSTALL REAR SEAT SIDE GARNISH  (See INSTALLATION )
  7. INSTALL REAR DOOR SCUFF PLATE  (See INSTALLATION )
  8. INSTALL REAR SEAT INNER WITH CENTER BELT ASSEMBLY RH  (See INSTALLATION  )
  9. INSTALL REAR SEAT BELT OUTER ANCHOR  (See INSTALLATION  )
  10. INSTALL REAR SEATBACK ASSEMBLY  (See INSTALLATION )
  11. INSTALL REAR SEAT HEADREST ASSEMBLY RH & LH 
  12. INSTALL REAR SEAT CUSHION ASSEMBLY  (See INSTALLATION )
    Fig 3: Installing Tether Anchor Cover To Package Tray Trim Panel
    G05298543Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals