LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2008 >> GS 450h >> Repair and Diagnosis >> Body & Frame >> Windows >> Windshield/WINDOWGLASS >> Power Window Control System >> Data List / Active Test
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Data List / Active Test

  1. READ DATA LIST 

    HINT:

    Using the Techstream's Data List allows switch, sensor, actuator and other item values to be read without removing any parts. Reading the Data List early in troubleshooting is one way to save time.

    1. Connect the Techstream to the DLC3.
    2. Turn the power switch on (IG) and turn the Techstream ON.
      1. Select the following menu items: Body / Master Switch / Data List.
      2. Read the Data List according to the display on the Techstream.

        Master Switch: 

        DATA LIST

        Tester Display Measurement Item/Range Normal Condition Diagnostic Note
        D Door P/W Auto SW Driver side power window auto switch signal / ON or OFF ON: Driver door power window auto switch is operated
        OFF: Driver door power window auto switch is not operated        		 -
        P Door P/W Auto SW Front passenger side power window AUTO UP / DOWN switch signal / ON or OFF ON: Front passenger door power window auto switch is operated
        OFF: Front passenger door power window auto switch is not operated        		 -
        RL Door P/W Auto SW Rear LH power window AUTO UP / DOWN switch signal / ON or OFF ON: Rear LH power window auto switch is operated
        OFF: Rear LH power window auto switch is not operated        		 -
        RR Door P/W Auto SW Rear RH power window AUTO UP / DOWN switch signal / ON or OFF ON: Rear RH power window auto switch is operated
        OFF: Rear RH power window auto switch is not operated        		 -
        P Door P/W Up SW Front passenger side power window manual up switch signal / ON or OFF ON: Front passenger door power window manual up switch is operated
        OFF: Front passenger door power window manual up switch is not operated        		 -
        RL Door P/W Up SW Rear LH power window manual up switch signal / ON or OFF ON: Rear LH power window manual up switch is operated
        OFF: Rear LH power window manual up switch is not operated        		 -
        RR Door P/W Up SW Rear RH power window manual up switch signal / ON or OFF ON: Rear RH power window manual up switch is operated
        OFF: Rear RH power window manual up switch is not operated        		 -
        P Door P/W Down SW Front passenger side power window manual down switch signal / ON or OFF ON: Front passenger door power window manual down switch is operated
        OFF: Front passenger door power window manual down switch is not operated        		 -
        RL Door P/W Down SW Rear LH power window manual down switch signal / ON or OFF ON: Rear LH power window manual down switch is operated
        OFF: Rear LH power window manual down switch is not operated        		 -
        RR Door P/W Down SW Rear RH power window manual down switch signal / ON or OFF ON: Rear RH power window manual down switch is operated
        OFF: Rear RH power window manual down switch is not operated        		 -
        Window Lock Switch Status Window lock switch signal / ON or OFF ON: Window lock switch LOCK position
        OFF: Window lock switch UNLOCK position        		 -
      3. Select the following menu items: Body / D-Door Motor / Data List.
      4. Read the Data List according to the display on the Techstream.

        D-Door Motor: 

        DATA LIST

        Tester Display Measurement Item/Range Normal Condition Diagnostic Note
        D Door P/W Auto SW Driver door power window auto switch signal / ON or OFF ON: Driver door power window auto switch is operated
        OFF: Driver door power window auto switch is not operated        		 -
        D Door P/W Up SW Driver door power window manual up switch signal / ON or OFF ON: Driver door power window manual up switch is operated
        OFF: Driver door power window manual up switch is not operated        		 -
        D Door P/W Down SW Driver door power window manual down switch signal / ON or OFF ON: Driver door power window manual down switch is operated
        OFF: Driver door power window manual down switch is not operated        		 -
        Glass Position (Close - 1/4) Jam protection operation within range of fully closed to 1/4 open window glass position / OK or CAUTION OK: Margin is sufficient during manual UP operation
        CAUTION: May be displayed even when no resistance is applied in each position. In this case, there is a foreign object stuck in that position.
        		 -
        Glass Position (1/4 - 2/4) Jam protection operation within range of 1/4 to 1/2 open window glass position / OK or CAUTION OK: Margin is sufficient during manual UP operation
        CAUTION: May be displayed even when no resistance is applied in each position. In this case, there is a foreign object stuck in that position.
        		 -
        Glass Position (2/4 - 3/4) Jam protection operation within range of 1/2 to 3/4 open window glass position / OK or CAUTION OK: Margin is sufficient during manual UP operation
        CAUTION: May be displayed even when no resistance is applied in each position. In this case, there is a foreign object stuck in that position.
        		 -
        Glass Position (3/4 -Open) Jam protection operation within range of 3/4 to fully open window glass position / OK or CAUTION OK: Margin is sufficient during manual UP operation
        CAUTION: May be displayed even when no resistance is applied in each position. In this case, there is a foreign object stuck in that position.
        		 -
      5. Select the following menu items: Body / P-Door Motor / Data List.
      6. Read the Data List according to the display on the Techstream.

        P-Door Motor: 

        DATA LIST

        Tester Display Measurement Item/Range Normal Condition Diagnostic Note
        P Door P/W Auto SW Front passenger side power window auto switch signal / ON or OFF ON: Front passenger door power window auto switch is operated
        OFF: Front passenger door power window auto switch is not operated        		 -
        P Door P/W Up SW Front passenger side power window manual up switch signal / ON or OFF ON: Front passenger door power window manual up switch is operated
        OFF: Front passenger door power window manual up switch is not operated        		 -
        P Door P/W Down SW Front passenger side power window manual down switch signal / ON or OFF ON: Front passenger door power window manual down switch is operated
        OFF: Front passenger door power window manual down switch is not operated        		 -
        Glass Position (Close - 1/4) Jam protection operation within range of fully closed to 1/4 open window glass position / OK or CAUTION OK: Margin is sufficient during manual UP operation
        CAUTION: May be displayed even when no resistance is applied in each position. In this case, there is a foreign object stuck in that position.
        		 -
        Glass Position (1/4 - 2/4) Jam protection operation within range of 1/4 to 1/2 open window glass position / OK or CAUTION OK: Margin is sufficient during manual UP operation
        CAUTION: May be displayed even when no resistance is applied in each position. In this case, there is a foreign object stuck in that position.
        		 -
        Glass Position (2/4 - 3/4) Jam protection operation within range of 1/2 to 3/4 open window glass position / OK or CAUTION OK: Margin is sufficient during manual UP operation
        CAUTION: May be displayed even when no resistance is applied in each position. In this case, there is a foreign object stuck in that position.
        		 -
        Glass Position (3/4 -Open) Jam protection operation within range of 3/4 to fully open window glass position / OK or CAUTION OK: Margin is sufficient during manual UP operation
        CAUTION: May be displayed even when no resistance is applied in each position. In this case, there is a foreign object stuck in that position.
        		 -
      7. Select the following menu items: Body / RL-Door Motor / Data List.
      8. Read the Data List according to the display on the Techstream.

        RL-Door Motor: 

        DATA LIST

        Tester Display Measurement Item/Range Normal Condition Diagnostic Note
        RL Door P/W Auto SW Rear LH power window auto switch signal / ON or OFF ON: Rear LH power window auto switch is operated
        OFF: Rear LH power window auto switch is not operated        		 -
        RL Door P/W Up SW Rear LH power window manual up switch signal / ON or OFF ON: Rear LH power window manual up switch is operated
        OFF: Rear LH power window manual up switch is not operated        		 -
        RL Door P/W Down SW Rear LH power window manual down switch signal / ON or OFF ON: Rear LH power window manual down switch is operated
        OFF: Rear LH power window manual down switch is not operated        		 -
        Glass Position (Close - 1/4) Jam protection operation within range of fully closed to 1/4 open window glass position / OK or CAUTION OK: Margin is sufficient during manual UP operation
        CAUTION: May be displayed even when no resistance is applied in each position. In this case, there is a foreign object stuck in that position.
        		 -
        Glass Position (1/4 - 2/4) Jam protection operation within range of 1/4 to 1/2 open window glass position / OK or CAUTION OK: Margin is sufficient during manual UP operation
        CAUTION: May be displayed even when no resistance is applied in each position. In this case, there is a foreign object stuck in that position.
        		 -
        Glass Position (2/4 - 3/4) Jam protection operation within range of 1/2 to 3/4 open window glass position / OK or CAUTION OK: Margin is sufficient during manual UP operation
        CAUTION: May be displayed even when no resistance is applied in each position. In this case, there is a foreign object stuck in that position.
        		 -
        Glass Position (3/4 -Open) Jam protection operation within range of 3/4 to fully open window glass position / OK or CAUTION OK: Margin is sufficient during manual UP operation
        CAUTION: May be displayed even when no resistance is applied in each position. In this case, there is a foreign object stuck in that position.
        		 -
      9. Select the following menu items: Body / RR-Door Motor / Data List.
      10. Read the Data List according to the display on the Techstream.

        RR-Door Motor: 

        DATA LIST

        Tester Display Measurement Item/Range Normal Condition Diagnostic Note
        RR Door P/W Auto SW Rear RH power window auto switch signal / ON or OFF ON: Rear RH power window auto switch is operated
        OFF: Rear RH power window auto switch is not operated        		 -
        RR Door P/W Up SW Rear RH power window manual up switch signal / ON or OFF ON: Rear RH power window manual up switch is operated
        OFF: Rear RH power window manual up switch is not operated        		 -
        RR Door P/W Down SW Rear RH power window manual down switch signal / ON or OFF ON: Rear RH power window manual down switch is operated
        OFF: Rear RH power window manual down switch is not operated        		 -
        Glass Position (Close - 1/4) Jam protection operation within range of fully closed to 1/4 open window glass position / OK or CAUTION OK: Margin is sufficient during manual UP operation
        CAUTION: May be displayed even when no resistance is applied in each position. In this case, there is a foreign object stuck in that position.
        		 -
        Glass Position (1/4 - 2/4) Jam protection operation within range of 1/4 to 1/2 open window glass position / OK or CAUTION OK: Margin is sufficient during manual UP operation
        CAUTION: May be displayed even when no resistance is applied in each position. In this case, there is a foreign object stuck in that position.
        		 -
        Glass Position (2/4 - 3/4) Jam protection operation within range of 1/2 to 3/4 open window glass position / OK or CAUTION OK: Margin is sufficient during manual UP operation
        CAUTION: May be displayed even when no resistance is applied in each position. In this case, there is a foreign object stuck in that position.
        		 -
        Glass Position (3/4 -Open) Jam protection operation within range of 3/4 to fully open window glass position / OK or CAUTION OK: Margin is sufficient during manual UP operation
        CAUTION: May be displayed even when no resistance is applied in each position. In this case, there is a foreign object stuck in that position.
        		 -
      11. Select the following menu items: Body / Main Body / Data List.
      12. Read the Data List according to the display on the Techstream.

        Main Body (Body ECU): 

        DATA LIST

        Tester Display Measurement Item/Range Normal Condition Diagnostic Note
        D Door Courtesy SW Driver side door courtesy switch signal / ON or OFF ON: Driver side door is open
        OFF: Driver side door is closed        		 -
        P Door Courtesy SW Front passenger side door courtesy switch signal / ON or OFF ON: Front passenger side door is open
        OFF: Front passenger side door is closed        		 -
        RR Door Courtesy SW Rear RH side door courtesy switch signal / ON or OFF ON: Rear RH side door is open
        OFF: Rear RH side door is closed        		 -
        RL Door Courtesy SW Rear RL side door courtesy switch signal / ON or OFF ON: Rear LH side door is open
        OFF: Rear LH side door is closed        		 -
  2. ACTIVE TEST 

    HINT:

    Using the Techstream to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.

    1. Connect the Techstream to the DLC3.
    2. Turn the power switch on (IG) and turn the Techstream ON.
      1. Select the following menu items: Body / D-Door Motor / Active Test.
      2. Perform the Active Test according to the display on the Techstream.

        D-Door Motor: 

        ACTIVE TEST CHART

        Tester Display Test Part Control Range Diagnostic Note
        Power Window Power window UP/OFF (OFF) -
        Power Window Power window DOWN / OFF (OFF) -
      3. Select the following menu items: Body / P-Door Motor / Active Test.
      4. Perform the Active Test according to the display on the Techstream.

        P-Door Motor: 

        ACTIVE TEST CHART

        Tester Display Test Part Control Range Diagnostic Note
        Power Window Power window UP / OFF (OFF) -
        Power Window Power window DOWN / OFF (OFF) -
      5. Select the following menu items: Body / RL-Door Motor / Active Test.
      6. Perform the Active Test according to the display on the Techstream.

        RL-Door Motor: 

        ACTIVE TEST CHART

        Tester Display Test Part Control Range Diagnostic Note
        Power Window Power window UP / OFF (OFF) -
        Power Window Power window DOWN / OFF (OFF) -
      7. Select the following menu items: Body / RR-Door Motor / Active Test.
      8. Perform the Active Test according to the display on the Techstream.

        RR-Door Motor: 

        ACTIVE TEST CHART

        Tester Display Test Part Control Range Diagnostic Note
        Power Window Power window UP / OFF (OFF) -
        Power Window Power window DOWN / OFF (OFF) -
scientia non olet · About LEMON Manuals