Inspection Procedure

1. Check for DTCs.

   Result 

   RESULT CHART
   
   

   Result	Proceed to
   DTC is not output	A
   B2311 is output	B
   B2312 is output	C
   B2313 is output	D

B:  GO TO DTC B2311 

C:  GO TO DTC B2312 

D:  GO TO DTC B2313 

A: Go to next step 

1. Connect the Techstream to the DLC3.
2. Turn the power switch on (IG) and turn the Techstream ON.
3. Select the following menu items: Body / Master Switch / Data List.
4. Read the Data List according to the display on the Techstream.

   Master switch: 

   DATA LIST
   
   

   Tester Display	Measurement Item/Range	Normal Condition	Diagnostic Note
   D Door P/W Auto SW	Driver side power window AUTO UP / DOWN switch signal / ON or OFF	ON: Driver side power window switch is operated (AUTO operation) OFF: Driver side power window switch is not operated	-

   OK: 

   ON is displayed on the Techstream screen during AUTO operation. 

NG: REPLACE POWER WINDOW MASTER SWITCH  (See REMOVAL )

OK: REPLACE POWER WINDOW REGULATOR MOTOR ASSEMBLY (for Driver Side)  (See REMOVAL )