Rear Speed Sensor: Removal

HINT:

Use the same procedures for the LH side and RH side.
The procedures listed below are for the LH side.

CAUTION: When the brake caliper is removed from the brake disc, do not start the hybrid system. If the hybrid system is started, the brake fluid pressure may increase.

REMOVE REAR WHEEL
REMOVE REAR SPEED SENSOR LH
1. Disconnect the sensor connector.
2. Remove the bolt and sensor.
  NOTE: Prevent foreign matter from attaching to the sensor tip.
  
  Fig 1: Locating Sensor Connector With Bolt
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002