LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2008 >> GS 450h >> Repair and Diagnosis >> Brakes >> Traction Control >> Brake Control >> VSC Off Switch >> On-Vehicle Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

On-Vehicle Inspection

  1. INSPECT VSC OFF SWITCH 
    1. Remove the VSC OFF switch.
    2. Disconnect the VSC OFF switch connector.
    3. Measure the resistance according to the value(s) in the table below.

      Standard resistance 

      STANDARD RESISTANCE SPECIFICATION

      Tester Connection Switch Condition Specified Condition
      3-4 Switch is pushed in Below 1 Ω
      3-4 Switch is not pushed in 10 kΩ or higher

      If the value is not as specified, replace the VSC OFF switch.

      Fig 1: Identifying VSC OFF Switch Connector
      G05816442Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals