LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2008 >> GS 450h >> Repair and Diagnosis >> Brakes >> Traction Control >> Brake Control >> Yaw Rate And Acceleration Sensor >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Yaw Rate And Acceleration Sensor: Removal

  1. REMOVE FRONT CONSOLE UPPER PANEL GARNISH  (See REMOVAL )
  2. REMOVE CONSOLE UPPER PANEL ASSEMBLY  (See REMOVAL )
  3. REMOVE INSTRUMENT PANEL FINISH PANEL END RH  (See REMOVAL )
  4. REMOVE INSTRUMENT PANEL FINISH PANEL END LH  (See REMOVAL )
  5. REMOVE CONSOLE BOX PLATE  (See REMOVAL )
  6. REMOVE CONSOLE BOX REGISTER ASSEMBLY  (See REMOVAL )
  7. REMOVE CONSOLE BOX  (See REMOVAL )
  8. REMOVE NO. 2 CONSOLE BOX DUCT 
    1. Remove the 2 clips and No. 2 duct.
      Fig 1: Locating No. 2 Console Box Duct With Clips
      G05816428Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  9. REMOVE NO. 1 CONSOLE BOX DUCT 
    1. Remove the clip and No. 1 duct.
      Fig 2: Locating No. 1 Console Box Duct With Clip
      G05816429Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  10. REMOVE YAW RATE SENSOR 
    1. Disconnect the sensor connector.
    2. Disconnect the 2 wire harness clamps.
    3. Remove the 2 bolts and sensor.
      NOTE: Do not remove the sensor from the bracket.
      Fig 3: Locating Yaw Rate Sensor With Wire Harness Clamps
      G05816430Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals