LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2008 >> GS 450h >> Repair and Diagnosis >> Electrical >> Starter >> Starting >> Power Switch >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Power Switch: Removal

  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
    CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
  2. REMOVE FRONT CONSOLE UPPER PANEL GARNISH  (See REMOVAL )
  3. REMOVE CONSOLE UPPER PANEL ASSEMBLY  (See REMOVAL )
  4. REMOVE INSTRUMENT PANEL FINISH PANEL END LH  (See REMOVAL )
  5. REMOVE FRONT DOOR SCUFF PLATE LH  (See REMOVAL )
  6. REMOVE FRONT DOOR OPENING TRIM COVER LH  (See REMOVAL )
  7. REMOVE INSTRUMENT SIDE PANEL LH  (See REMOVAL )
  8. REMOVE INSTRUMENT PANEL NO. 1 UNDER COVER SUB-ASSEMBLY  (See REMOVAL )
  9. REMOVE INSTRUMENT PANEL NO. 1 SAFETY PAD SUB-ASSEMBLY  (See REMOVAL )
  10. REMOVE DRIVER SIDE KNEE AIRBAG ASSEMBLY  (See INSTALLATION )
  11. REMOVE POWER SWITCH 
    1. Disconnect the switch connector.
    2. Detach the 2 claws and remove the switch.
      Fig 1: Locating Power Switch Connector Claws
      G05303659Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals