LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2008 >> GS 450h >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - System And Circuit Testing, On-Vehicle Inspection, Removal, Inspection & Installation >> Mass Air Flow Meter >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Mass Air Flow Meter: Installation

  1. INSTALL MASS AIR FLOW METER 
    1. Install a new O-ring to the MAF meter.
    2. Install the MAF meter with the 2 screws.
    3. Connect the MAF meter connector.
      4. Fig 1: Locating Screws And MAF Meter
      G05302522Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL ENGINE ROOM SIDE COVER RH  (See INSTALLATION )
  3. INSTALL COOL AIR INTAKE DUCT SEAL  (See INSTALLATION )
  4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
  5. PERFORM INITIALIZATION 
    1. Perform initialization (see INITIALIZATION ).
    NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.
scientia non olet · About LEMON Manuals