VVT Sensor: Removal

DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
REMOVE V-BANK COVER (See INSPECTION )
REMOVE VVT SENSOR (for Intake Side of Bank 1)
1. Disconnect the sensor connector.
2. Remove the bolt and sensor.
Fig 1: Locating Bolt And Sensor
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE VVT SENSOR (for Exhaust Side of Bank 1)
1. Disconnect the sensor connector.
2. Remove the bolt and sensor.
Fig 2: Locating VVT Sensor Bolt
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE VVT SENSOR (for Intake Side of Bank 2)
1. Disconnect the sensor connector.
2. Remove the bolt and sensor.
Fig 3: Locating VVT Sensor Bolt (For Intake Side Of Bank 2)
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE VVT SENSOR (for Exhaust Side of Bank 2)
1. Disconnect the sensor connector.
2. Remove the bolt and sensor.
Fig 4: Locating VVT Sensor Bolt (For Exhaust Side Of Bank 2)
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002