How To Proceed With Troubleshooting

HINT:

*: Use the Techstream.

1. VEHICLE BROUGHT TO WORKSHOP 
2. INSPECT BATTERY VOLTAGE 

   Standard voltage: 11 to 14 V 

   If the voltage is below 11V, recharge or replace the battery before proceeding.

3. CHECK MULTIPLEX COMMUNICATION SYSTEM* 
   1. Check for DTCs (see DTC CHECK / CLEAR ).

      Result 

      RESULT REFERENCE
      
      

      Result	Proceed to
      DTC is not output	A
      DTC is output	B

   B:  GO TO MULTIPLEX COMMUNICATION SYSTEM

   A: Go to Next Step 

4. CHECK CAN COMMUNICATION SYSTEM* 
   1. Check for DTCs.

      Result 

      RESULT REFERENCE
      
      

      Result	Proceed to
      DTC is not output	A
      DTC is output	B

   B:  GO TO CAN COMMUNICATION SYSTEM

   A: Go to Next Step 

5. CHECK DTC* 
   1. Check for DTCs.
   2. Clear the DTCs.
   3. Recheck for DTCs.
      1. Simulate the malfunction and check if the DTCs are output again (see DTC CHECK / CLEAR  ).

         Result 

         RESULT REFERENCE
         
         

         Result	Proceed to
         DTC is output	A
         DTC is not output	B
         DTCs are not output, and the malfunction can not be simulated or checked.	C

   B:  GO TO STEP  10

   C: SYMPTOM SIMULATION 

   A: Go to Next Step 

6. DTC CHART 
7. CIRCUIT INSPECTION 
8. REPAIR 
9. CONFIRMATION TEST 

   NEXT: END 

10. PROBLEM SYMPTOMS TABLE 
11. CIRCUIT INSPECTION 
12. CONFIRMATION TEST 

    NEXT: END