LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2008 >> GS 450h >> Repair and Diagnosis >> Suspension >> Suspension Control Systems >> Suspension Control >> Absorber Control Switch >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Absorber Control Switch: Removal

  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
    CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
  2. REMOVE FRONT CONSOLE UPPER PANEL GARNISH  (See REMOVAL )
  3. REMOVE CONSOLE UPPER PANEL ASSEMBLY  (See REMOVAL )
  4. REMOVE INSTRUMENT PANEL FINISH PANEL END RH  (See REMOVAL )
  5. REMOVE INSTRUMENT PANEL FINISH PANEL END LH  (See REMOVAL )
  6. REMOVE CONSOLE BOX PLATE  (See REMOVAL )
  7. REMOVE ABSORBER CONTROL SWITCH 
    1. Detach the 2 claws and remove the absorber control switch from the console box plate.
      Fig 1: Identifying Absorber Control Switch Claws
      G05296563Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals