DTC Check/Clear
- DTC CHECK/CLEAR
- DTC check
- Connect Techstream to the DLC3.
- Turn the power switch ON (IG).
- Read the DTCs following the prompts on the tester screen.
- DTC clear
- Connect Techstream to the DLC3.
- Turn the power switch ON (IG).
- Operate Techstream to clear the DTC.
HINT:
Refer to the Techstream operator's manual for further details.
- Turn the power switch OFF and Techstream switch off.
- DTC check
- END OF DTC CHECK/CLEAR
- Turn the power switch ON (IG).
- Check that the absorber control indicator goes off within approximately 2 seconds.