Inspection Procedure

1. Check for foreign matter on the display.

   OK: The display is clean. 

NG : CLEAN DISPLAY AND RECHECK TOUCH PANEL 

OK : Go to next step 

1. Enter the "Display Check" mode (Touch Switch Check) (see DISPLAY CHECK MODE  ).
2. Touch the display in the area where the switch malfunction occurs.

   OK: A "+" mark appears at the touched position. 

NG : REPLACE MULTI-DISPLAY 

Fig 1: Diagnosis Menu Screen Display - Touch Switch Check

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

OK : PROCEED TO NEXT INSPECTION PROCEDURE SHOWN IN PROBLEM SYMPTOMS TABLE