Accelerator Pedal: Installation

INSTALL ACCELERATOR PEDAL
1. Install the accelerator pedal with the 2 nuts.
  Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf)
  NOTE:
  - Avoid physical shocks to the accelerator pedal.
  - Do not disassemble the accelerator pedal assembly.
2. Connect the accelerator pedal sensor connector.
  
  Fig 1: Locating Nuts And Accelerator Pedal
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See INITIALIZATION ).