Mass Air Flow Meter: Installation

INSTALL MASS AIR FLOW METER
1. Install the mass air flow meter with the 2 screws.
  NOTE: Make sure the O-ring is not pinched.
  
  Fig 1: Locating Screws And Mass Air Flow Meter
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Connect the mass air flow meter connector.
INSTALL V-BANK COVER SUB-ASSEMBLY (See INSTALLATION )
INSTALL ENGINE ROOM SIDE COVER RH (See INSTALLATION )
INSTALL COOL AIR INTAKE DUCT SEAL (See INSTALLATION )
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See INITIALIZATION ).

Fig 2: Identifying Mass Air Flow Meter Connector
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002