LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2008 >> GS 460 >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System (1UR-FSE) - Circuit Tests And Repair Information >> VVT Sensor >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

VVT Sensor: Removal

  1. REMOVE COOL AIR INTAKE DUCT SEAL  (See REMOVAL )
  2. REMOVE ENGINE ROOM SIDE COVER LH  (See REMOVAL )
  3. REMOVE ENGINE ROOM SIDE COVER RH  (See REMOVAL )
  4. REMOVE V-BANK COVER SUB-ASSEMBLY  (See REMOVAL )
  5. REMOVE NO. 1 AIR CLEANER INLET  (See REMOVAL )
  6. REMOVE AIR CLEANER CAP SUB-ASSEMBLY  (See REMOVAL )
  7. REMOVE VVT SENSOR 
    1. Disconnect the 4 VVT sensors.
    2. Remove the 4 bolts and 4 VVT sensors.
      Fig 1: Locating Bolts And VVT Sensors
      G05804100Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals