Service Data
Water inlet with thermostat
SERVICE DATA (WATER INLET WITH THERMOSTAT) - 2GR-FSE COOLING
| Standard valve opening temperature | 80 to 84°C (176 to 183°F) |
| Standard valve lift | 8.0 mm (0.315 in.) or more at 95°C (203°F) |
Cooling fan motor
SERVICE DATA (COOLING FAN MOTOR) - 2GR-FSE COOLING
| No. 1 cooling fan motor | Standard current | 11.8 to 14.8A at 20°C (68°F) |
| No. 1 cooling fan motor | 6.8 to 9.8 A at 20°C (68°F) |
Cooling fan relay
SERVICE DATA (COOLING FAN RELAY) - 2GR-FSE COOLING
| 3-5 | 10 MΩ or higher |
| 3-5 | Below 1 Ω (when battery voltage is applied to terminals 1 and 2) |
Radiator cap (standard judgment criterion)
SERVICE DATA (RADIATOR CAP) - 2GR-FSE COOLING
| Standard valve (for brand-new cap) | 93.3 to 122.7 kPa (0.95 to 1.25 kgf/cm2 ,13.5 to 17.8 psi) |
| Minimum standard valve (after using cap) | 78.5 kPa (0.8 kgf/cm2 ,11.4 psi) |