Automatic Transaxle: TCM: Removal

DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See INITIALIZATION ).
REMOVE COOL AIR INTAKE DUCT SEAL (See REMOVAL )
REMOVE ENGINE ROOM SIDE COVER LH (See REMOVAL )
REMOVE ENGINE ROOM ECU COVER (See REMOVAL )
DISCONNECT WIRE HARNESS (See REMOVAL )
REMOVE TCM
1. Disconnect the 2 connectors.
2. Remove the 2 nuts and TCM.
  
  Fig 1: Locating TCM Nuts And Connector
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002