DTC Check/Clear
- CHECK DTC
- Connect the Techstream to the DLC3.
- Turn the ignition switch ON
- Turn the Techstream on.
- Enter the following menus: Body Electrical/(desired system)/Trouble Codes.
- Read the DTCs.
HINT:
Refer to the Techstream operator's manual for further details.
- CLEAR DTC
- Connect the Techstream to the DLC3
- Turn the ignition switch ON
- Turn the Techstream on.
- Enter the following menus: Body Electrical/(desired system)/Trouble Codes.
- Clear the DTCs.
HINT.
Refer to the Techstream operator's manual for further details.