DTC Check/Clear

CHECK DTC
1. Connect the Techstream to the DLC3.
2. Turn the ignition switch ON.
3. Turn the tester on.
4. Enter the following menus:
  1. Select- Body Electrical/(desired system)/Trouble Codes.
5. Read the DTCs by following the directions on the tester's screen.
  HINT:
  
  Refer to the Techstream operator's manual for further details.
CLEAR DTC
1. Connect the Techstream to the DLC3.
2. Turn the ignition switch ON.
3. Turn the tester on.
4. Enter the following menus
  1. Select: Body Electrical/(desired system)/Trouble Codes.
5. Erase the DTCs by following the directions on the tester's screen.
  HINT:
  
  Refer to the Techstream operator's manual for further details.