Rear Speed Sensor: Removal

HINT:

Replacement of RH side is same as that of LH side.

1. REMOVE REAR WHEEL 
2. REMOVE SPEED SENSOR REAR LH 
   1. Disconnect the speed sensor connector.
      Fig 1: Locating Speed Sensor Connector

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
   2. Remove the nut and speed sensor rear from the axle hub.
      NOTE:

      • Do not stick and foreign matter on the sensor tip.
      • Do not let the foreign matter into the sensor installation hole.
        Fig 2: Locating Nut And Speed Sensor Rear

        Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002