LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2008 >> GX 470 >> Repair and Diagnosis >> Brakes >> Traction Control >> Brake Control >> Steering Angle Sensor >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Steering Angle Sensor: Removal

  1. PRECAUTION 

    HINT:

    RS-1

  2. DISCONNECT BATTERY NEGATIVE TERMINAL 
  3. PLACE FRONT WHEELS FACING STRAIGHT AHEAD 
  4. REMOVE STEERING WHEEL COVER LOWER NO. 3 
  5. REMOVE STEERING WHEEL COVER LOWER NO. 2 
  6. REMOVE STEERING PAD  (See INSTALLATION )
  7. REMOVE STEERING WHEEL ASSEMBLY  (See REMOVAL )
  8. REMOVE STEERING COLUMN COVER  (See REMOVAL )
  9. REMOVE SPIRAL CABLE  (See REMOVAL )
  10. REMOVE TURN SIGNAL SWITCH ASSEMBLY  (See REMOVAL )
  11. REMOVE STEERING ANGLE SENSOR 
    1. Remove the steering sensor connector.
      Fig 1: Locating Steering Sensor Connector
      G04965580Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the 2 claws, then remove the steering sensor.
      Fig 2: Locating Claws And Steering Sensor
      G04965581Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals