System Outline

Door lock control (Lock and unlock) and panic control (Theft alarm and flash) is performed by remote control, using low-power electrical waves emitted by a transmitter, without the ignition key needing to be inserted in the door key cylinder,

1. Normal Operation

   * Lock operation

   When the lock SW on the transmitter is pressed, all the doors will be locked.

   * Unlock operation

   When the unlock SW on the transmitter is pressed once, the driver door only will be unlocked. When the unlock SW is pressed again within 3 seconds, all the doors will be unlocked.

2. Auto Lock Function

   When the door is not actually opened within 30 seconds of the door being unlocked by the unlock SW on the transmitter, all the doors will be automatically re-locked. If any of the following conditions are detected, the wireless door lock will not function.

   * Any door is open.

   * The ignition key is inserted into the ignition SW.

   * The lock detection SWs in the doors are all locked.

3. Wireless Door Lock Stop Function

   If any of the following conditions are detected, the wireless door lock will not function.

   Lock operation

   * When any door is open (Door courtesy SW on)

   * The ignition key is inserted into the ignition SW (Unlock warning SW on)

   * Ignition SW is on

   Unlock operation

   * Ignition SW is on

4. Buzzer Sound Function

   During a lock operation, if the body ECU receives a lock signal from the door lock detection SW, the wireless door lock buzzer will sound once. During an unlock operation, when the body ECU receives an unlock signal from the door lock detection SWs, the wireless door lock buzzer will sound twice.

   If any door is open, and the body ECU receives a lock signal from the transmitter, the wireless door lock buzzer sounds for approx. 10 seconds. If the door is closed, or ignition SW is turned on, or if the unlock signal is received from the transmitter while the buzzer is sounding, the buzzer will stop.

5. Visual Confirmation of Lock or Unlock

   During a lock operation, when the body ECU receives a lock signal from the door lock detection SW, the turn signal lights are flashed once. During an unlock operation, when the body ECU receives an unlock signal from the door lock detection SW, the turn signal lights are flashed twice.

6. Remote Panic Operation

   The panic operation will function regardless of if any doors are locked, unlocked, open or closed. When the panic button (Transmitter) is pushed once, the interior lights will light up, and the theft alarm and horn will sound and the turn signal lights, headlights and taillights will flash. If the panic or the unlock button (Transmitter) is pushed again, the interior lights will be turned off, the alarm and horn will turn off, and the light flashing will stop. The panic operation will not function if ignition key is in the ignition key cylinder.

7. Repeat Function

   If the lock detection signal, sent in response to the output lock signal, is not received after the body ECU has output the lock signal, the lock signal will be output again.