Service Data
Front wheel alignment
FRONT WHEEL ALIGNMENT - SERVICE DATA
| Vehicle height | ||
| - | Front A-B: | 91.9 mm (3.62 in.) |
| - | Rear C-D: | 77.1 mm (3.04 in.) |
| Toe-in (total) | ||
| - | - | 0°05' +- 0°10' (0.08° +- 0.16°) |
| - | - | 1 +- 2 mm (0.04 +- 0.08 in.) |
| - | Rack end length difference | 1.0 mm (0.04 in.) or less |
| Wheel angle | ||
| - | Inside wheel | 36°36' (34°36' to 37°36') |
| - | - | 36.60° (34.60° to 37.60°) |
| - | Outside wheel: Reference | 32°58' |
| - | - | 32.97° |
| Camber | ||
| - | - | 0°01' +- 45' (0.02° +-0.75°) |
| - | Right-left error | 45' (0.75°) or less |
| Caster | ||
| - | - | 3°17' +- 45' (3.28° +-0.75°) |
| - | Right-left error | 45' (0.75°) or less |
| Steering axis inclination | ||
| - | - | 12°29' +- 45' (12.48° +- 0.75°) |
| - | Right-left error | 45' (0.75°) or less |
A: Ground clearance of front wheel center
B: Ground clearance of lower suspension arm No. 2 set bolt center
C: Ground clearance of rear wheel center
D: Ground clearance of strut rod set bolt center
Front suspension
FRONT SUSPENSION - SERVICE DATA
| Upper arm ball joint turning torque | 4.5 N*m (46 kgf*cm, 40 in.*lbf) or less |
| Lower arm ball joint turning torque | 3.0 N*m (31 kgf*cm, 27 in.*lbf) or less |
| Stabilizer link ball joint turning torque | 2.0 N*m (20 kgf*cm, 18 in.*lbf) or less |
Rear suspension
FRONT SUSPENSION - SERVICE DATA
| Stabilizer link ball joint turning torque | 2.0 N*m (20 kgf*cm, 18 in.*lbf) or less |