Absorber Control Actuator: Inspection

INSPECT ABSORBER CONTROL ACTUATOR FRONT

Disconnect the absorber control actuator connector.
Measure the resistance between each terminal of the front absorber control actuator.

Standard resistance

RESISTANCE SPECIFICATION TABLE

Tester Connection	Resistance
1 - 2	6.8 +- 0.4 Ω
3 - 4	6.8 +- 0.4 Ω

Fig 1: Identifying Front Absorber Control Actuator Connector Terminals

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

INSPECT ABSORBER CONTROL ACTUATOR REAR

Disconnect the absorber control actuator connector.
Measure the resistance between each terminal of the front absorber control actuator.

Standard resistance

RESISTANCE SPECIFICATION TABLE

Tester Connection	Resistance
1 - 2	6.8 +- 0.4 Ω
3 - 4	6.8 +- 0.4 Ω

Fig 2: Identifying Rear Absorber Control Actuator Connector Terminals