LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2008 >> GX 470 >> Repair and Diagnosis >> Suspension >> Suspension Control Systems >> Suspension Control >> Acceleration Sensor >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Acceleration Sensor: Installation

  1. INSTALL REAR ACCELERATION SENSOR 
    1. Install the rear acceleration sensor with a clip and a bolt.

      Torque: 7.8 N*m (80 kgf*cm, 69 in.*lbf) 

    2. Connect the connector.
  2. INSTALL QUARTER INSIDE TRIM BOARD LH 
  3. INSTALL REAR FLOOR MAT SUPPORT PLATE REAR 
  4. INSTALL BACK DOOR WEATHERSTRIP 
  5. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP RH 
  6. INSTALL REAR DOOR SCUFF PLATE LH 
  7. INSTALL QUARTER SCUFF PLATE INSIDE LH 
  8. INSTALL NO. 2 REAR SEAT ASSEMBLY LH 
  9. INSTALL FRONT ACCELERATION SENSOR 
    1. Install the front acceleration sensor with a bolt.

      Torque: 7.8 N*m (80 kgf*cm, 69 in.*lbf) 

    2. Connect the connector to the front acceleration sensor.
  10. INSTALL INSTRUMENT PANEL LOWER LH 
  11. INSTALL INSTRUMENT PANEL FINISH PANEL LOWER 
  12. INSTALL INSTRUMENT PANEL FINISH PLATE 
  13. INSTALL INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY NO. 1 
  14. INSTALL COWL SIDE TRIM BOARD LH 
  15. INSTALL FRONT DOOR SCUFF PLATE LH 
scientia non olet · About LEMON Manuals