Height Control Compressor: Removal

REMOVE REAR DISC WHEEL
REMOVE QUARTER PANEL MUDGUARD REAR LH
REMOVE FUEL TANK FILLER PIPE PROTECTOR
1. Remove the 4 clips and the fuel tank filler pipe protector.
REMOVE HEIGHT CONTROL COMPRESSOR COVER
1. Remove the 3 clips and the height control compressor cover.
REMOVE HEIGHT CONTROL FILTER
1. Disconnect the 2 clips and the 2 hoses.
2. Remove the 2 bolts and the height control filter.
DISCONNECT HEIGHT CONTROL TUBE NO. 2
1. Remove the holder.
2. Spread the clip and slowly pull the height control tube No. 2 straight out.
  NOTE: Do not remove the clip from the union except when replacing it.
  
  Fig 1: Identifying Height Control Tube No. 2
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Remove the 2 O-rings.
REMOVE HEIGHT CONTROL COMPRESSOR ASSEMBLY
1. Disconnect the connector.
2. Remove the 3 clamps.
  
  Fig 2: Identifying Clamps
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Remove the 3 bolts.
  
  Fig 3: Identifying Height Control Compressor Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
4. Disconnect the clip and remove the No. 1 hose.
5. Remove the 3 bolts, the height control compressor and the dryer with the bracket.
  
  Fig 4: Identifying Height Control Compressor Assembly Bracket & Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
6. Remove the bolt, the dryer and the O-ring.
7. Remove the 3 bushings from the height control compressor assembly.