Height Control Sensor: Installation

INSTALL HEIGHT CONTROL SENSOR SUB-ASSEMBLY REAR LH
1. Install the height control sensor with the 2 bolts.
  Torque: 13 N*m (133 kgf*cm, 10 ft.*lbf)
2. Align the matchmarks on the link and the bracket.
3. Connect the sensor link with the nut.
  Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf)
4. Connect the connector to the height control sensor.
INSTALL REAR DISC WHEEL
Torque: 112 N*m (1,140 kgf*cm, 83 ft.*lbf)
MEASURE VEHICLE HEIGHT (See ADJUSTMENT )
ADJUST VEHICLE HEIGHT (See ADJUSTMENT )