Park/Neutral Position Switch: Installation

INSTALL PARK/NEUTRAL POSITION SWITCH ASSEMBLY
1. Install the park/neutral position switch with the bolt
  Torque: 13 N*m (130 kgf*cm, 10 ft.*lbf)
2. Install a new lock washer and the nut.
  Torque: 6.9 N*m (70 kgf*cm, 61 in.*lbf)
3. Bend the claws on the lock washer to stake the nut.
  
  Fig 1: Locating Lock Washer And Nut
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
CONNECT PARK/NEUTRAL POSITION SWITCH CONNECTOR
CONNECT BATTERY NEGATIVE TERMINAL
INSPECT PARK/NEUTRAL POSITION SWITCH ASSEMBLY (See INSPECTION )
ADJUST PARK/NEUTRAL POSITION SWITCH ASSEMBLY (See ADJUSTMENT )
INSPECT SHIFT LEVER POSITION (See ADJUSTMENT )
ADJUST SHIFT LEVER POSITION (See ADJUSTMENT )