Shift Lever Assembly: Installation

INSTALL FLOOR SHIFT ASSEMBLY
1. Install the transmission floor shift assembly with the 4 bolts.
  Torque: 12 N*m (122 kgf*cm, 9.0 ft.*lbf)
2. Connect the connector on the transmission floor shift assembly.
  
  Fig 1: Locating Transmission Floor Shift Assembly
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
CONNECT TRANSMISSION CONTROL CABLE ASSEMBLY
1. Connect the transmission control cable assembly with the clip, from the floor shift lever assembly.
  Torque: 12 N*m (122 kgf*cm, 9 ft.*lbf)
  NOTE:
  - Protrusion facing upward.
  - When the nut is remove, be sure to tighten the nut.
    
    Fig 2: Locating Transmission Control Cable Assembly
    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL UPPER CONSOLE PANEL ASSEMBLY
INSTALL NO. 2 CONSOLE UPPER PANEL GARNISH
INSTALL NO. 1 CONSOLE UPPER PANEL GARNISH
INSTALL FLOOR SHIFT LEVER KNOB SUB-ASSEMBLY
1. Install the floor shift lever knob sub-assembly.
INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY
1. Install the shift lever knob sub-assembly.
CONNECT BATTERY NEGATIVE TERMINAL
INSPECT SHIFT LEVER POSITION (See ADJUSTMENT )
ADJUST SHIFT LEVER POSITION (See ADJUSTMENT )